The DATAKOM D-700-SYNC+GSM is a next generation synchronizing genset controller combining multi-functionality and wide communication capabilities together with a reliable and low cost design. The unit offers auto-genset learning capability, a first in the industry. The multi-functionality of the unit allows it to be a genset or mains synchronizer, even a parallel to mains controller with soft transfer in both directions. Software features are complete with easy firmware upgrade through USB port. The Windows based PC software allows monitoring and programming through USB, RS-485, RS-232, Ethernet and GPRS. The Rainbow Scada web service allows monitoring and control of an unlimited number of gensets from a single central location. COMMUNICATIONS: Ethernet port (10/100Mb) GSM-GPRS Internal GPRS modem Embedded web server Web monitoring Web programming Central Monitoring through internet Modbus RTU through RS-485 SMS message sending E-mail sending Free PC software: Rainbow Plus Free Central Monitoring (2 years) Modbus TCP/IP SNMP USB Host USB Device RS-485 port, adjustable baud rate RS-232 Micro SD card slot J1939-CANBUS FUNCTIONALITIES: Multi genset synch and load share Mains synchronization Single genset parallel with mains AMF unit with uninterrupted transfer ATS unit with uninterrupted transfer Remote start controller Manual start controller Engine controller Remote display & control unit TOPOLOGIES: 3 phases 4 wires, star 3 phases 4 wires, delta 3 phases 3 wires, delta, 3 CTs 3 phases 3 wires, delta, 2 CTs (L1-L2) 3 phases 3 wires, delta,2 CTs (L1-L3) 2 phases 3 wires, L1-L2 2 phases 3 wires, L1-L3 1 phase 2 wires TECHNICAL SPECIFICATIONS: Alternator voltage: 0 to 300 V-AC (Ph-N) Alternator frequency: 0-600 Hz. Mains (Busbar) voltage: 0 to 300 V-AC (Ph-N) Mains (Busbar) frequency: 0-600 Hz. Topology: 1-2-3 phases, with or without neutral DC Supply Range: 8.0 to 36.0 V-DC. DC power consumption: - 300 mA-DC typical @12V-DC - 150 mA-DC typical @24V-DC - 600 mA-DC max. @12V-DC - 300 mA-DC max. @24V-DC V-A-cos Accuracy: 0.5% + 1 digit KW-kVA-kVAr Accuracy: 1.0% + 1 digit CT Range: 5/5A to 5000/5A VT Range: 0.1/1 to 6500 / 1 kW Range: 0.1kW to 65000 kW Current Inputs: from current transformers. ../5A. Digital inputs: input voltage 0 to 36 V-DC. Analog input range: 0-5000 ohms. Digital Outputs: Protected mosfet semiconductor outputs, rated 1Amp@28V-DC Cranking dropouts: survives 0V for 100ms. Magnetic pickup voltage: 0.5 to 30VAC. Magnetic pickup frequency: 0 to 10000 Hz. GOV Control Output: 0-10V-DC AVR Control Output: ±3V-DC, fully isolated Charge Alternator Excitation: 2W. Display Screen: - B/W versions: 2.9”, 128x64 pixels - TFT versions: 4.3”, 480x272 pixels Ethernet Port: 10/100 Mbits USB Device: USB 2.0 Full speed USB Host: USB 2.0 Full speed RS-485 Port: selectable baud rate RS-232 Port: selectable baud rate Data Link Port: Fully Isolated CANBUS Operating temperature: -20°C to 70°C (-4 to +158 °F) Storage temperature: -40°C to 80°C (-40 to +176°F) Maximum humidity: 95% non-condensing. IP Protection: IP54 from front panel, IP30 from the rear. Dimensions: 243 x 183 x 47mm (WxHxD) Panel Cut-out Dimensions: 216 x 156 mm minimum. Weight: 700 g (approx.) Case Material: High Temperature, non-flammable ABS/PC Mounting: Front panel mounted with rear retaining plastic brackets. EU Directives Conformity: -2006/95/EC (low voltage) -2004/108/EC (electro-magnetic compatibility) Norms of reference: - EN 61010 (safety requirements) - EN 61326 (EMC requirements) UL / CSA Conformity: -UL 6200, Controls for Stationary Engine Driven Assemblies (Certificate # - 20140725-E314374) CSA Compatibility: -CAN/CSA C22.2 No. 14-13 – Industrial Control Equipment WE DO NOT SHIP THIS PRODUCT TO USA AND CANADA