DKG-217 MANUAL AND REMOTE START UNIT WITH SYNCHROSCOPE AND CHECK SYNCH RELAY The DATAKOM DKG-217 is an innovative generator control unit integrating 4 different functions needed for manually synchronized parallel gensets in a zero power consumption at reststructure. Integrated functions are: a manual start unit with power metering, a remote start unit, a led bargraph synchroscope, a configurable check synch relay. The DKG-217 is designed to operate both manually and remotely. In genset running and synchronization checking modes, the DKG-217 controls the automatic starting and stopping of the generating set. Once the generator is running, it monitors internal protections and external fault inputs. If a fault condition occurs, the unit shuts down the engine automatically and indicates the failure source with the corresponding red led lamp. The DKG-217 provides a comprehensive set of digitally adjustable timers, threshold levels, input and output configurations and operating sequences. All programs may be modified via front panel pushbuttons, and do not require an external unit. It is possible to monitor the operation of the system locally or remotely with the WINDOWS based PC utility program. FEATURES: Manual starting and stopping Zero power consumption at rest Remote Start operation available LED bargraph synchroscope Programmable ?V, ?f, ?? for check synch relay Engine control Generator protection Built in alarms and warnings 3 phase genset voltage inputs 1 phase genset CT input 1 phase busbar voltage input Engine oil pressure measurement Engine coolant temperature measurement Genset active power measurement (single phase) Genset power factor measurement (single phase) Periodic maintenance request indicator Engine hours run counter Event logging Statistical counters Front panel configurable 100+ adjustable parameters Logic level serial port Optional RS-232 adapter Free MS-Windows Remote monitoring SW: -local, LAN, IP and modem connection -monitoring, download of parameters LED displays Configurable analogue inputs: 2 Configurable digital inputs: 5 Configurable relay outputs: 2 Total relay outputs: 5 Survives cranking dropouts Sealed front panel Plug-in connection system for easy replacement Small dimensions (130x100x39mm) FUNCTIONALITIES: - a manual start unit with power metering - a remote start unit - a led bargraph synchroscope - a configurable check synch relay TECHNICAL SPECIFICATIONS: Alternator voltage: 15 to 300 V-AC (Ph-N) Alternator frequency: 0-100 Hz. Busbar voltage: 0 to 300 V-AC (Ph-N) Busbar frequency: 50 / 60 Hz Current input: from current transformer, .../5A. Max load 0.7VA Digital inputs: input voltage 0 - 30 V-DC. Internally connected to battery positive via 4700 ohm resistor. Analog inputs: Resistor input 0 to 5000 ohms connected to the battery negative. Sources 10 mA when closed to battery negative. Measurement category: CAT II Air category: Pollution degree II DC Supply range: 9.0 V-DC to 30.0 V-DC Cranking dropouts: survives 0 V for 100ms Maximum current consumption: 350 mA-DC (Relay outputs open) Check synch relay output: 16 A / 250 V. DC relay outputs: 10A / 28 V. Max. current for each terminal: 10A-RMS. Charge alternator excitation current: 54 mA-DC @ 12 V-DC. Communication port: Logic levels. 2400 bauds, no parity, 1 stop bit. Operating temperature range: -20°C to +70°C (-4°F to +158°F) Storage temperature range: -40°C to +80°C (-40°F to +176°F) Maximum humidity: 95%, non-condensing IP protection: IP65 from front panel, IP30 from the rear Dimensions: 130 x 100 x 39mm (WxHxD) Panel Cut-out dimensions: 116 x 86mm minimum. Mounting: Front panel mounted with rear retaining steel spring Weight: 270 g (approx.) Case material: High temperature, self extinguishing ABS (UL94-V0, 110°C) WE DO NOT SHIP THIS PRODUCT TO USA AND CANADA