The DATAKOM DKG-509 is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations. The unit is available with MPU or CANBUS versions. The panel has an optional internal GSM modem module and is able to initiate modem calls and send SMS messages in fault conditions through either internal or external modems. The unit provides a comprehensive set of digitally adjustable timers, threshold levels, input and output configurations, operating sequences and engine types. All programs may be modified via front panel pushbuttons, and do not require an external unit. The WINDOWS based RAINBOW program allows remote monitoring and control. The unit supports MODBUS protocol enabling communication with PLCs and building management systems. The MODBUS protocol is also supported through GSM and PSTN modems. FEATURES: True RMS measurements ECU connection through J1939 CAN option J1939 ECU warnings displayed as text MPU input option Dual genset mutual standby operation Event logging with time stamp and measurements Battery backed-up real time clock Built in daily / weekly / monthly exerciser Weekly operation schedule programs Field adjustable parameters RS-232 serial port Free MS-Windows Remote monitoring SW GSM and PSTN modem support GSM SMS message sending on fault MODBUS communications Multiple language support Customer logo display capability 16 Amp contactor outputs 1 Amp DC semiconductor outputs Configurable analogue inputs: 4 Configurable digital inputs: 7 Configurable digital outputs: 2 Total digital outputs: 6 I/O expansion capability Plug-in connection system TECHNICAL SPECIFICATIONS: Alternator voltage: 0 to 300 V-AC Phase to Neutral (0 to 520 V-AC Phase to Phase) Alternator frequency: 0-100 Hz. Mains voltage: 0 to 300 V-AC Phase to Neutral (0 to 520 V-AC Phase to Phase) Mains frequency: 0-100 Hz. Current input range: 0.1 – 6 A AC Voltage burden: < 0.1VA per phase Current burden: < 0.5VA per phase @ 5A AC Accuracy: Voltage: 1.0%+1digit Current: 1.0%+1 digit Frequency: 0.5%+1 digit Power(kW,kVAr): 2.0%+12digit Power factor: 2.0%+1 digit DC Supply range: 9.0 VDC to 33.0 VDC Cranking dropouts: survives 0 V for 100ms Typical stand-by current consumption: 100 mADC. Maximum current consumption: 250 mADC. Generator/mains contactor outputs: 16 A @ 250 VAC. DC outputs: 10A @ 28 VDC. relay outputs. Charge alternator excitation: min 2W. Magnetic pickup input:: 0.5 – 30 V-AC. Magnetic pickup frequency: 10 KHz max. Current inputs: from current transformers, .../5A. Max load 0.7VA per phase. Digital inputs: input voltage 0 - 30 VDC. Internally connected to battery positive via 47’000 ohm resistor. Analog inputs: Resistor input 0 to 5000 ohms connected to the battery negative. Sources 5 mA when closed to battery negative. Measurement category: CAT II Air category: Pollution degree II Communication port: RS-232. 9600 bauds, no parity, 1 stop bit. Operating temperature range: -20?C to +70?C (-4 ?F to +158 ?F) Storage temperature range: -40?C to +80?C (-40 ?F to +176 ?F) Maximum humidity: 95%, non-condensing Dimensions: 200x148x46mm (WxHxD) Panel Cut-out dimensions: 176 x 121mm minimum. Weight: 450 g (approx.) Case material: High temperature, self extinguishing ABS/PC (UL94-V0) IP protection: IP65 from front panel, IP30 from the rear WE DO NOT SHIP THIS PRODUCT TO USA AND CANADA