Натисніть знайти для пошуку

Bigl.ua

•

•

•

•

•

•

Датчик оптичний Panasonic CX-491 Sensor

Характеристики та опис

Основні

Виробник

Panasonic

Product Number

CX-491

Part Number

CX-491

Regulatory compliance

EMC Directive, RoHS Directive

Sensing range

3 m 9.843 ft
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.

Sensing object

Ø50 mm Ø1.969 in or more opaque, translucent or specular object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.

Hysteresis

Repeatability(perpendicular to sensing axis)

0.5 mm 0.020 in or less

Supply voltage

12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Current consumption

13 mA or less

Output

NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)

Output:Output operation

Switchable either Light-ON or Dark-ON

Output:Short-circuit protection

Incorporated

Response time

1 ms or less

Operation indicator

Orange LED(lights up when the output is ON)
(incorporated on the receiver for thru-beam type)

Stability indicator

Green LED(lights up under stable light received condition or stable dark condition)
(incorporated on the receiver for thru-beam type)

Power indicator

Sensitivity adjuster

Continuously variable adjuster(incorporated on the receiver for thru-beam type)

Automatic interference prevention function

Incorporated(Two units of sensors can be mounted close together.)

Protection

IP67 (IEC)

Ambient temperature

- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉

Ambient humidity

35 to 85 % RH, Storage: 35 to 85 % RH

Ambient illuminance

Incandescent light: 3,000 lx or less at the light-receiving face

Voltage withstandability

1,000 V AC for one min. between all supply terminals connected together and enclosure

Insulation resistance

20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure

Vibration resistance

10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each

Shock resistance

500 m/s²acceleration (50 G approx.) in X, Y and Z directions three times each

Emitting element (modulated)

Red LED

Emitting element (modulated):Peak emission wavelength

680 nm 0.027 mil

Material

Enclosure: PBT (polybutylene terephthalate)
Lens: acrylic
Indicator cover: acrylic

Cable

0.2 mm²3-core cabtyre cable, 2 m 6.562 ft long

Cable extension

Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.

Weight

Net weight: 50 g approx.
Gross weight: 80 g approx.

Accessory

RF-230 (Reflector): 1 pc.

Product Number	CX-491
Part Number	CX-491
Regulatory compliance	EMC Directive, RoHS Directive
Sensing range	3 m 9.843 ft (Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Sensing object	Ø50 mm Ø1.969 in or more opaque, translucent or specular object (Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor. (Note) Make sure to confirm detection with an actual sensor before use.
Hysteresis	-
Repeatability(perpendicular to sensing axis)	0.5 mm 0.020 in or less
Supply voltage	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption	13 mA or less
Output	NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Output:Output operation	Switchable either Light-ON or Dark-ON
Output:Short-circuit protection	Incorporated
Response time	1 ms or less
Operation indicator	Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Stability indicator	Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Power indicator	-
Sensitivity adjuster	Continuously variable adjuster(incorporated on the receiver for thru-beam type)
Automatic interference prevention function	Incorporated(Two units of sensors can be mounted close together.)
Protection	IP67 (IEC)
Ambient temperature	- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance	Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance	500 m/s²acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated)	Red LED
Emitting element (modulated):Peak emission wavelength	680 nm 0.027 mil
Material	Enclosure: PBT (polybutylene terephthalate) Lens: acrylic Indicator cover: acrylic
Cable	0.2 mm²3-core cabtyre cable, 2 m 6.562 ft long
Cable extension	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.
Weight	Net weight: 50 g approx. Gross weight: 80 g approx.
Accessory	RF-230 (Reflector): 1 pc.