Data sheet IM 053DP (053-1DP00) Technical data Order no. 053-1DP00 Type IM 053DP Module ID - General information Note - Features PROFIBUS-DP slave (DP-V0, DP-V1) 244 Byte input and 244 Byte output data up to 64 peripheral modules Technical data power supply Power supply (rated value) DC 24 V Power supply (permitted range) DC 20.4...28.8 V Reverse polarity protection Current consumption (no-load operation) 90 mA Current consumption (rated value) 0.95 A Inrush current 3.9 A I²t 0.14 A²s Max. current drain at backplane bus 3 A Max. current drain load supply 10 A Power loss 3 W Status information, alarms, diagnostics Status display yes Interrupts yes, parameterizable Process alarm yes, parameterizable Diagnostic interrupt yes, parameterizable Diagnostic functions yes, parameterizable Diagnostics information read-out possible Supply voltage display green LED Service Indicator - Group error display red LED Channel error display none Hardware configuration Racks, max. 1 Modules per rack, max. 64 Number of digital modules, max. 64 Number of analog modules, max. 64 Communication Fieldbus PROFIBUS-DP to EN 50170 Type of interface RS485 isolated Connector Sub-D, 9-pin, female Topology Linear bus with bus termination at both ends www.vipa.com © by VIPA GmbH, Ohmstr. 4, 91074 Herzogenaurach, Germany All data with reservation and subject to change. Publish date: 13.05.2015 Page 2/2 Electrically isolated Number of participants, max. 125 Node addresses 1 - 125 Transmission speed, min. 9.6 kbit/s Transmission speed, max. 12 Mbit/s Address range inputs, max. 244 Byte Address range outputs, max. 244 Byte Number of TxPDOs, max. - Number of RxPDOs, max. - Housing Material PPE / PPE GF10 Mounting Profile rail 35 mm Mechanical data Dimensions (WxHxD) 48.5 mm x 109 mm x 76.5 mm Weight 155 g Environmental conditions Operating temperature 0 °C to 60 °C Storage temperature -25 °C to 70 °C